Imagine trying to explain where every drop of water goes in a leaky bucket just by looking at numbers in a spreadsheet. Frustrating, right? Now picture a visual diagram where thick arrows show the main flows and thin ones reveal the leaks-instantly, you know where to focus your repair efforts. That’s exactly what Sankey diagrams do for industrial energy systems, transforming complex data into clear, actionable insights that help engineers and facility managers identify where energy is being wasted and where conservation efforts will have the greatest impact.

Table of Contents

What makes Sankey diagrams perfect for energy visualization

Sankey diagrams are flow charts where the width of arrows is proportional to the quantity being represented. Named after Irish Captain Matthew Henry Phineas Riall Sankey who first used this visualization in 1898 to analyze steam engine efficiency, these diagrams have become the main tool for visualizing industrial metabolism and energy flows in complex systems.

What makes them particularly valuable for energy analysis is their ability to show both the structure and the magnitude of flows simultaneously. When you look at a Sankey diagram of a boiler or furnace, you immediately see not just how much energy is lost, but where those losses occur in the system. The visual proportionality means that a glance reveals which losses deserve attention first-no calculations needed.

How furnace Sankey diagrams reveal efficiency opportunities

Industrial furnaces are perfect candidates for Sankey diagram analysis because they involve multiple energy streams and loss pathways. A typical furnace energy balance shows fuel input entering on the left, useful output (heat delivered to the product) flowing to the right, and various losses branching off along the way.

The largest single loss in most fuel-fired heating equipment is flue gas loss, often representing more than all other losses combined. In a typical industrial furnace operating at elevated temperatures, flue gas losses can account for thirty to fifty percent of total energy input. This happens because combustion gases must be exhausted while they still contain substantial thermal energy-they can only cool down to the process temperature before being discarded.

Reading a furnace Sankey diagram

When engineers create a Sankey diagram for a furnace, they typically show gross fuel input as the starting point. From there, the diagram branches to show heat storage in the furnace structure, wall losses through insulation, cooling water losses, radiation losses from openings, and the dominant flue gas losses. What remains after all these losses is the available heat that can actually be delivered to the product.

For example, in a furnace operating at seventeen hundred degrees Fahrenheit, roughly fifty percent of input energy goes up the stack as flue gas losses. Another six to twelve percent escapes through furnace walls, two to three percent is consumed during startup and cooldown cycles, and five to ten percent disappears through various other pathways like cooling systems and radiation. This leaves only fifty to sixty percent as useful output-the energy that actually heats the product.

Targeting conservation measures where they matter most

The real power of Sankey diagrams lies in how they guide decision-making. By making loss magnitudes visually obvious, they help prioritize conservation investments. Looking at a furnace diagram immediately shows that reducing flue gas temperature should be the top priority, since that’s where the biggest opportunity exists.

Reducing exhaust gas temperature by preheating combustion air is one of the most effective strategies. For every twenty degrees Celsius reduction in flue gas temperature, furnace efficiency increases by approximately one percentage point. Installing a recuperator or regenerator to capture waste heat from exhaust gases and transfer it to incoming combustion air can reduce flue gas temperatures from seven hundred fifty degrees to three hundred degrees or lower, dramatically improving overall efficiency.

The Sankey diagram also reveals a multiplier effect that makes addressing smaller losses worthwhile. Because flue gas loss is proportional to total fuel input, reducing any other loss-wall losses, cooling losses, or radiation losses-creates a double benefit. For instance, improving wall insulation to save one hundred thousand BTUs per hour of wall loss allows the furnace to reduce firing rate by two hundred thousand BTUs per hour, because the corresponding flue gas loss also decreases.

Understanding variable versus fixed losses

Sankey diagrams help distinguish between fixed losses that occur regardless of production level and variable losses that change with throughput. Wall losses, heat storage, and radiation are relatively constant whether the furnace is producing at fifty percent or one hundred percent capacity. This means that at reduced production rates, each unit of product carries a higher burden of these fixed losses.

Flue gas losses, conversely, tend to increase with production volume. When a furnace is pushed beyond design capacity, operators must run at higher temperatures to maintain heat transfer rates, which increases both the temperature and volume of exhaust gases. The Sankey diagram makes it clear that optimum efficiency occurs when the furnace operates near its designed capacity-not underloaded and not overloaded.

Using Sankey diagrams for complex plant analysis

Beyond individual equipment, Sankey diagrams excel at showing energy flows through entire facilities. Companies implementing energy management systems according to ISO 50001 use Sankey diagrams to measure and analyze consumption at the production site or plant level, supporting both internal communication and documentation for energy audits.

A plant-wide Sankey diagram might show multiple fuel inputs-natural gas, electricity, coal-entering from the left, flowing through various transformation processes like boilers and power generation, then branching to different consumption areas: process heating, machine drives, facility HVAC, and lighting. This holistic view reveals opportunities that might be invisible when analyzing systems in isolation.

Finding system-level optimization opportunities

Consider a plant where a high-temperature furnace exhausts hot gases while a nearby process requires preheated water. Analyzing each system separately might suggest adding a fresh air preheater to the furnace and installing electric heaters for the water system. But a composite Sankey diagram showing both systems together reveals the opportunity to route furnace exhaust through a waste heat boiler, generating hot water for the other process while improving furnace efficiency-a win-win that siloed analysis would miss.

These integrated views are particularly valuable in industries with complex material and energy interactions, such as steel mills, chemical plants, and refineries. The Sankey diagram helps engineers understand how changes in one area ripple through the entire system, enabling truly optimized solutions rather than local improvements that might create problems elsewhere.

Making Sankey diagrams work in practice

Creating useful Sankey diagrams requires good data. Engineers need to measure fuel consumption, exhaust gas temperatures and composition, process temperatures, and production rates. Many facilities already collect this data for process control, but organizing it into an energy balance requires systematic accounting.

The process typically starts with defining system boundaries and measurement points. For a furnace, this means measuring fuel input, monitoring flue gas conditions, tracking cooling water flow and temperature rise, and recording production throughput. Once collected, this data flows into calculations that quantify each loss category, which then become the proportionally-sized arrows in the diagram.

Modern software tools have made creating Sankey diagrams much easier than in Captain Sankey’s day of hand-drawn charts. Specialized programs can link directly to plant databases, automatically updating diagrams as conditions change. This allows operators to see in real-time how process adjustments affect the overall energy balance, turning the Sankey diagram from a static analysis tool into a dynamic management instrument.

What do you think? If you were managing an industrial facility, which would be more valuable: detailed numerical reports showing percentage losses in each category, or a visual Sankey diagram that makes the relative magnitudes immediately obvious? How might real-time Sankey diagrams change how operators respond to process changes?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://en.wikipedia.org/wiki/Sankey_diagram
  2. https://onlinelibrary.wiley.com/doi/10.1111/j.1530-9290.2008.00004.x
  3. https://www.energy.gov/sites/prod/files/2014/05/f15/35876.pdf
  4. https://www.ipoint-systems.com/software/e-sankey/energy-flow-diagram/

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Energy Management – Audit & Conservation

1 Energy Audit Defined

  1. Energy Audit Defined
  2. Energy Audit and Efficiency
  3. Energy Management and Audit
  4. Need for an Energy Audit
  5. Types of Energy Audit
  6. Preliminary Energy Audit
  7. Detailed Energy Audit

2 Energy Audit Instruments

  1. Classification of Instruments
  2. Electrical Measuring Instruments
  3. Temperature Measuring Instruments
  4. Light Level Measuring Instruments
  5. Combustion Analyser
  6. Pressure Measuring Devices
  7. Hygrometer
  8. Speed and Flow Measurement
  9. Leak Detectors
  10. Fuel Measurement

3 Home Energy Audit

  1. Preliminary Energy Audit of Home
  2. Conducting Home Energy Audit
  3. Adopt Energy Conservation Measures
  4. Good Housekeeping Measures

4 Development of Energy Balance

  1. Energy Audit of an Oil Mill
  2. Electrical Energy Balance
  3. Energy Audit of a Printing Press
  4. Development of Energy and Material Balance
  5. The Sankey Diagram and its Use
  6. Energy Balance of the Boiler

5 Identification of Energy Conservation Measures

  1. Need for Energy Conservation
  2. Identification of Energy Conservation Measures
  3. Energy Conservation Measures in Buildings
  4. Energy Conservation Measures in Motors
  5. Energy Conservation Measures in Transport
  6. Energy Conservation Measures in Industrial Sectors
  7. Energy Conservation Measures in Different Industrial Equipments/Processes
  8. Energy Conservation Measures in Lighting

6 Classification of Energy Conservation Measures

  1. Short Term : Low Cost Measures
  2. Medium Term : Medium Cost Measures
  3. Long Term : High Cost Measures

7 Energy Audit and Conservation in Steel Company

  1. Process
  2. Energy Consumption
  3. Energy Balance
  4. Energy Conservation Measures

8 Energy Audit and Conservation in a Pharmaceutical Industry

  1. Preliminary Energy Audit
  2. Analysis of Energy Usage
  3. Energy Conservation Measures
  4. Short Term Measures

9 Medium and Long Term Energy Conservation Measures in Pharmaceutical Industry

  1. Installation of Correctly Rated Motors
  2. Storage of Coal on Concrete Floor
  3. Power Factor Improvement
  4. Condensate Recovery from Boiler Feed Water
  5. Waste Heat Recovery
  6. Use of Energy Efficient Lights
  7. Excess Demand

10 Energy Audit and Conservation in a Wire Manufacturing Company

  1. Energy Audit Data
  2. Energy Balance
  3. Energy Conservation Measures

11 Energy Conservation Measures in Vanaspati Industries

  1. Energy Audit of Vanaspati Industry : A
  2. Energy Audit of Vanaspati Industry : B
  3. Energy Audit of Vanaspati Industry : C
  4. Storage and Handling of Coal
  5. Low Power Factor
  6. Steam Leakage Through Valves
  7. Insulation of Steam Pipe Lines
  8. Replacement of Under Loaded Motors
  9. Loading of Transformers
  10. Reduction of Contract Demand
  11. Heat Recovery from Flue Gases
  12. Improvement in Lighting System
  13. Energy Conservation in Cooling Tower Fans

12 Energy Conservation by Energy Efficient Devices

  1. Energy Efficient Lighting Devices
  2. Energy Efficient Fan Regulators
  3. Household Appliances
  4. Adopting Renewable Energy Systems
  5. Energy Efficient Motors

13 Integrated Rural Energy Planning-I

  1. Methodology of Rural Energy Planning
  2. An Example of a Block
  3. Survey Data and Limitation
  4. Present and Future Energy Scenario with IREP
  5. Characteristics of Surveyed Villages
  6. Energy Used in Domestic Sector
  7. Energy used in Agriculture sector
  8. Animal Power
  9. Energy used in Transport Sector
  10. Energy used in Industrial Sector
  11. Annual Energy Consumption

14 Integrated Rural Energy Planning-II

  1. Estimation of Energy Consumption
  2. Projected Energy Resource Mix
  3. Proposed Action Plan for next Five Years
  4. Recommended Action : Energy Plan
  5. Effective Implementation of Energy Plan
  6. Awareness and Training Programmes

15 Cost Analysis of Energy Savings

  1. Simple Payback Period
  2. Present Worth Method
  3. Life Cycle Cost Analysis
  4. Life Cycle Cost of Renewable Energy Systems

16 Optimal Mix of Renewable Energy Technologies

  1. Energy Survey Data
  2. Energy Consumption Data in Domestic Sector
  3. Characteristics of Surveyed Villages
  4. Strategy of Optimisation
  5. Life-Cycle Cost of Optimal Mix
  6. Optimisation Results